×
Home
Current Archive Editorial Board News Contact
Issue image

Vol 13, No 1 (2019)

All issues
Authors in this issue:

Aleksandar Lebl, Aleksandra Vulovic, Andrei Zelentsov, Appikatla Leela Ratnam, B. Prabhakar Reddy, Barhm Mohamad, Dragan Mitic, Ghazali Mebarki, Hocine Hares, Igor Saveljic, Josephat Peter, Mahieddine Naoun, Malaraju Chengal Raju, Meruva Parvathi, Meysam Atashafrooz, Mourad Brioua, Nenad Filipovic, Radoslav Rajkovic, Saeed Asil Gharebaghi, Saeed Reza Sabbagh Yazdi, Smiljana Djorovic, Snežana Rajkovic, Tahereh Asadi, Tayebeh Amiri,

Published: 01.09.2019.

Contents

01.12.2018. Research paper
The Effects of Buoyancy Force on the Irreversibility of Three-Dimensional Step Flow in an Inclined Duct

This research deals with the study of the irreversibility of three-dimensional mixed convection flow in an inclined duct with step. To reach this goal, an analysis of entropy generation is carried out according to the second law of thermodynamics. The effects of buoyancy force on the flow irreversibility are analyzed with all details. The results s...

By MEYSAM ATASHAFROOZ, TAHEREH ASADI

01.12.2018. Research paper
Aerodynamic performances improvement of NACA 4415 profile by passive flow control using vortex generators

Improvement of the airfoil NACA 4415 aerodynamic performances by flow control using a passive technique was achieved in this study. Gothic-shaped vortex generators were added at the profile upper surface. Vortex Generators (VG) were used to avoid boundary layer separation at the profile trailing edge, thus reducing the drag force and improving aero...

By HOCINE HARES, GHAZALI MEBARKI, MOURAD BRIOUA, MAHIEDDINE NAOUN

01.12.2018. Research paper
Three dimensional boundary layer flow of water based coupled stress nanofluid over a bidirectional linear stretching sheet in the presence of heat source, thermal radiation and chemical reaction

The present investigation represents a study on the effects of heat and mass transfer flow in the presence of couple stress coefficient, heat source parameter, radiation parameter, chemical reaction parameter and Schmidt number using nanofluids over a stretching sheet. The governing partial differential equations are reduced to ordinary differentia...

By MERUVA PARVATHI, APPIKATLA LEELA RATNAM, MALARAJU CHENGAL RAJU

01.12.2018. Research paper
A Proposed Damping Coefficient of Quick Adaptive Galerkin Finite Volume Solver for Elasticity Problems

A Quick Adaptive Galerkin Finite Volume (QAGFV) solution of Cauchy momentum equations for plane elastic problems is presented in this research. A new damping coefficient is introduced to preserve the efficiency of the iterative pseudo-explicit solution procedure. It is shown that the numerical oscillations are not only effectively damped by the pro...

By SAEED REZA SABBAGH YAZDI, TAYEBEH AMIRI, SAEED ASIL GHAREBAGHI

01.12.2018. Research paper
1D and 3D Modeling of Modern Automotive Exhaust Manifold

This paper presents the simulation of the multi-cylinder 4-stroke cycle spark-ignition engine using a commercial simulation tool, AVL BOOST and Fire. Various models were examined to select the appropriate models that would best serve to analyze the main components of the exhaust systems: the plenum chamber, the muffler and the exhaust manifold bran...

By BARHM MOHAMAD, ANDREI ZELENTSOV

01.12.2018. Research paper
Effects of Chemical Reaction on MHD Flow Past an Impulsively Started Infinite Vertical Plate with Variable Temperature and Mass Diffusion in the Presence of Hall Current

In this paper, the effects of chemical reaction on unsteady MHD flow of viscous incompressible electrically conducting fluid past an impulsively started oscillating vertical plate with variable temperature and constant mass diffusion in the presence of Hall current have been presented. The dimensionless governing partial differential equations of t...

By B. PRABHAKAR REDDY, JOSEPHAT PETER

01.12.2018. Research paper
Computational Analysis of Hip Implant Surfaces

During the total or partial hip replacement procedure, a damaged part of the hip joint is replaced with an artificial one. Both types of procedures include removal and replacement of the femoral head. After the femoral head is removed, an implant is inserted into the hollow femur. When the healing process starts, the newly formed bone interlocks wi...

By ALEKSANDRA VULOVIC, NENAD FILIPOVIC

01.12.2018. Research paper
Computational Simulation of Carotid Artery: From Patient-Specific Images to Finite Element Analysis

Nowadays, finite element analysis is a well-assessed technique which enables investigation of blood vessels behavior under different boundary conditions. Given the rapid progression of both medical imaging techniques and computational methods, the challenge of using the simulation of human arteries such as carotid arteries to address different medi...

By SMILJANA DJOROVIC, IGOR SAVELJIC, NENAD FILIPOVIC

01.12.2018. Research paper
A Proposed Method for Determining Propulsion Coefficient Based on Testing Motor Freighters on Danube Waterway Network

The paper presents a proposal of mathematical models for the determination of propulsion coefficient, ηpp, intended for the analysis of motor freighters applied on the river watercourses. As the main paper contribution three different model types are developed, depending on the variable which contributes to ηpp value. These variables are: 1...

By RADOSLAV RAJKOVIC, DRAGAN MITIC, ALEKSANDAR LEBL, SNEŽANA RAJKOVIC

Recent issues

View Archive