In this paper, turbulent fluid flow is analyzed using a two-equation turbulent finite element model that can calculate values in the viscous sublayer. Implicit integration of the equations is used for determining the fluid velocity, fluid pressure, turbulence, kinetic energy, and dissipation of turbulent kinetic energy. These values are calculated ...

By Aleksandar Nikolić, Marko Topalović, Vladimir Simić, Milan Blagojević

Molecular dynamics simulations of the rigid-anvil collision test are performed by using a two-dimensional computational setup that mimics the traditional ballistic Taylor test. In this extensively utilized computational setup, the slender nanoscale projectiles collide with a rigid wall with hypersonic striking velocities ranging from 3 km/s to 30 k...

By Sreten Mastilović

Vibration suppression has been thoroughly studied in the last few years. A number of methods has been proposed for this purpose. An evolving method lies in the search of band gap regions, that is, certain frequency ranges where vibrations are isolated. In the present investigation, a periodic unit cell of a chiral metamaterial has been created in o...

By Panagiotis Koutsianitis, Georgios K. Tairidis, Alexandros Kougkoulos, Georgios E. Stavroulakis

Calendering is a mechanical finishing technology used in the leather, textile, and paper industry, with the mechanism of reshaping and deforming fibers of the web to be calendered with the help of pressure and heat transfer. In this paper, a comparative study has been done to examine the flow of heat inside the calender nip using an unsteady heat c...

By Neelam Gupta, Neel Kanth

Analysis of the influence of different forms of channel outlet on the heat exchange hydro-thermal characteristics over a rectangular channel embedded with trapezoidal baffle has been made in this paper. Four different forms of the outlets, viz., (I) an outlet similar to the inlet (case-A), (II) two outlets in the upper and lower parts of the exit s...

By Sandip Saha, Apurba Narayan Das, Santanu Raut

In an ultrasound-guided needle insertion, physicians should adjust a certain insertion angle and the position of the transducer to ensure that the initial point and final target are in-plane inside the imaging plane. One of the crucial problems in this interventional procedure is poor and inconsistent needle visibility in B-mode ultrasound. In this...

By Hesty Susanti, S. Suprijanto, Deddy Kurniadi

The purpose of this study is to create a universal computational model of a plane-stressed joint element, which could be implemented as a special finite element of the beam-column subassembly integrated into the FEA procedure to improve its accuracy. The combination both of the finite element method and the finite difference method has been accepte...

By Sergey Savin

This paper deals with jet engines compressor disks which have dovetail joints with blades. A compressor disk with reduced fatigue resistance was taken as an example. Two simplified conceptual solutions of the dovetail joint with blades were devised. Based on the low cycle fatigue theory, the crack initiation life of their critical parts with newly-...

By Strain Posavljak, Gordana Tosic, Katarina Maksimovic

In this study, a new numerical method based on the combination of High Exploration Particle Swarm Optimization (HEPSO) and Moving Least Squares (MLS) is introduced to solve nonlinear porous media equations. The MLS scheme is employed to describe an appropriate discretized function, and the penalty method is implemented to convert the constrained pr...

By Mohammad Javad Mahmoodabadi, Ali Reza Ghanizadeh

In this research, analysis of entropy generation for mixed convection fluid flow in a trapezoidal enclosure is numerically investigated. To achieve this goal, the influences of Grashof number, Reynolds number and inclination angle of enclosure side walls on the distributions of the velocity and temperature fields and the values of entropy generatio...

By Meysam Atashafrooz, Mohsen Shafie