Recent studies have attempted to find methods and techniques that enable the development of heat transfer within thermal transformers. For this purpose, this paper includes a numerical simulation of a non-Newtonian fluid inside a chamber with four hot bodies. The chamber is exposed to a magnetic field of constant and uniform intensity. Also, the up...

By Yamina Anouar

This paper presents a comparative analysis of numerical simulations of blood flow through the left ventricle using SPH (LS-DYNA) and FVM (Ansys Fluent) solvers. Numerical simulations based on SPH and FVM methods can provide a more comprehensive understanding of cardiac blood flow patterns. In Fluent, left ventricle walls were modeled as boundary co...

By Marko Topalović, Aleksandar Bodić, Miloš, S. Pešić,, Miljan S. Milošević, Miroslav M. Živković

In a compound parabolic solar collector, a glass cover is normally used for decreasing the rate of heat loss from the absorber. In this paper, a solar collector with two glass covers and a concentration ratio of 1.6 is simulated and examined for the purpose of higher performance. The distance between covers is 45 mm and the cavity of solar collecto...

By Mohammad Omidpanah, Seyyed Abdolreza Gandjalikhan Nassab

This paper presents а numerical solution of a non-similar two-dimensional boundary-layer flow over a cylinder. The assumptions and related two-dimensional flow equations are presented. The fourth-order Runge-Kutta method with the backward differentiation formula (BDF) method to separation point is implemented in the numerical solution usin...

By Vahid Rezaee, Arash Houshmand

Accurate prediction of stress and displacement in plates with central cracks is vital for engineering design safety. However, the impact of finite plate size on stress and displacement distribution is an important factor that has not been fully addressed in previous studies, highlighting the need for further investigation. Thus, this study presents...

By Ali Ehsan Seif, Mohammad Zaman Kabir

The use of complex fluids is one of the modern techniques used in small devices in order to enhance their thermal performance. This paper is a numerical study of a complex fluid imprisoned in a chamber with two hot bodies exposed to a magnetic field of constant intensity. The upper and lower walls move horizontally at a constant velocity, while the...

By Abdeljalil Benmansour, Hacène Hamoudi

The mechanical response of blast-resistant vehicles, such as Infantry Fighting Vehicles (IFVs), Mechanized Infantry Combat Vehicles (MICVs), Armored Personal Vehicles (APVs), and Mine-Resistant Ambush-Protected (MRAP) vehicles, is crucial for their effective design. When designing armored vehicles, it is important to achieve a balance between rigid...

By Miloš S. Pešić, Aleksandar S. Bodić, Živana M. Jovanović Pešić, Nikola B. Jović, Miroslav M. Živković

The present study discusses one dimensional groundwater infiltration phenomenon in unsaturated soil. The mathematical formulation is developed using Dracy’s law, equation of continuity, and standard relations between diffusivity coefficient and hydraulic conductivity. We solved the obtained system using double power series method...

By Pragneshkumar R. Makwana, Amit K. Parikh

This paper aims to predict the behavior of a complex fluid though a small-sized thermal exchanger. The fluid used is of shear-thickening type of power-law index (n = 1.4) and Prandtl number (Pr = 50). The Ostwald model was utilized to define the dynamic viscosity. The exchanger consists of three rectangular cross-section tubes placed inside a therm...

By Hacène Hamoudi, Mohamed Bouzit

The main contribution of this study is to present a modified V-corrugated grooved absorber plate in the construction of plane solar air heaters for higher performance. The combined effects of extended heat transfer area due to the V-shaped absorber, the suction process by the grooves that maintains the convective flow closed to the heated absorber ...

By Maryam Moein Addini, Seyyed Abdolreza Gandjalikhan Nassab