Agitator shapes are of paramount importance in mixing processes, prompting researchers to explore new configurations to improve these operations. Our study focuses on the three-dimensional fluid dynamics in a flat-bottomed cylindrical tank equipped with different anchor shapes, ranging from the standard configuration to modified variants. Using both Newtonian and non-Newtonian fluids under laminar conditions, we aim to assess the impact of these variations on agitation performance. To analyze these data, we have defined ranges of parameters, including hydrodynamic parameters such as Reynolds number, covering a range from 1 to 100, as well as the rheological behavior index, varying from 0.6 to 1.4. In addition, we are exploring the influence of the number of convergent hollows. The new agitators equipped with convergent hollows have generated axial and radial velocities approaching the tangential velocity, thereby promoting a more uniform distribution of fluids in the tank. This configuration thus facilitates a more homogeneous and efficient mixing. Additionally, energy consumption remains practically constant, offering advantages in terms of efficiency.
Alami AH, Abu Hawili A, Aokal K, Faraj M, Tawalbeh M. Enhanced heat transfer in agitated tanks by alternating magnetic field stirring of aqueous Fe–Cu nanofluid, Case Stud. Therm Eng. 2020;20:100640.
2.
Ameur H, Bouzit M. Numerical investigation of flow induced by a disk turbine in unbaffled stirred tank. Acta Sci Technol. 2013;35(3):469–76.
3.
Ameur H, Bouzit M, Helmaoui M. Hydrodynamic study involving a Maxblend impeller with yield stress fluids. J Mech Sci Technol. 2012;26(5):1523–30.
4.
Ameur H, Kamla Y, Sahel D. Optimization of the operating and design conditions to reduce the power consumption in a tank stirred by a paddle impeller, Period. Polytech Mech Eng. 2018;62(4):312–9.
5.
Ammar M, Driss Z, Chtourou W, Abid MS. Effects of baffle length on turbulent flows generated in stirred tanks. Cent Eur J Eng. 2011;1(4):401–12.
6.
Bertrand J. Agitation de fluides visqueux. Cas de mobiles à pales, d’ancres et de barrières, Thèse. 1983.
7.
Boonkanokwong V, Frank RP, Valliappan P, Remy B, Khinast JG, Glasser BJ. Flow of granular materials in a bladed mixer: effect of particle properties and process parameters on impeller torque and power consumption, Adv. Powder Technol. 2018;29(11):2733–52.
8.
Bouzit M, Benali L, Hachemi M, Bouzit F. CFD simulations of the 3D velocity profile of paddle agitator and two-blade impeller in stirred tank with a highly viscous Newtonian fluid. J Appl Sci. 2006;6(13):2733–40.
9.
Devi TT, Kumar B. Large-eddy simulation of turbulent flow in stirred tank with a curved blade impeller. J Eng Thermophys. 2015;24(2):152–68.
10.
Distelhoff MFW, Marquis AJ. Scalar mixing in the vicinity of two disk turbines and two pitched blade impellers. Chem Eng Sci. 2000;55(10):1905–20.
11.
Foukrach M, Ameur H. Effect of baffles shape on the flow patterns and power consumption in stirred vessels. SN Appl Sci. 2019;1(11):1503.
12.
Foukrach M, Bouzit M, Ameur H, Kamla Y. Effect of agitator’s types on the hydrodynamic flow in an agitated tank, Chin. J Mech Eng. 2020;33:1–18.
13.
Hami O, Draoui B, Mebarki B, Rahmani L, Bouanini M. Numerical model for laminar flow and heat transfer in an agitated vessel by inclined blades anchor. In: Proc CHT-08 ICHMT International Symposium on Advances in Computational Heat Transfer. 2008. p. 19.
14.
Kamla Y, Ameur H, Arab MI, Azeddine B. Data on the hydrodynamics and power consumption induced by modified anchor impellers in cylindrical tanks. Data Brief. 2021;39:107669.
15.
Kamla Y, Bouzit M, Ameur H, Arab MI, Hadjeb A. Effect of the inclination of baffles on the power consumption and fluid flows in a vessel stirred by a Rushton turbine. Chin J Mech Eng. 2017;30(4):1008–16.
16.
Kefayati GR. Mesoscopic simulation of mixed convection on non-Newtonian nanofluids in a two-sided lid-driven enclosure, Adv. Powder Technol. 2015;26(2):576–88.
17.
Luan D, Zhang S, Wei X, Duan Z. Effect of the 6PBT stirrer eccentricity and off-bottom clearance on mixing of pseudoplastic fluid in a stirred tank. Results Phys. 2017;7:1079–85.
18.
Mokhefi A. Hydrodynamic and thermal performance analysis of an inclined anchor impeller designed for yield stress food mixing applications, Food Bioprod. Process. 2023;143:255–70.
19.
Mokhefi A, Bouanini M, Elmir M, Spitéri P. Effect of the wavy tank wall on the characteristics of mechanical agitation in the presence of a Al2O3-water nanofluid, Metall. Mater Eng. 2021;27(3):301–20.
20.
Naik BAK, Vinod AV. Heat transfer enhancement using non-Newtonian nanofluids in a shell and helical coil heat exchanger, Exp. Therm Fluid Sci. 2018;90:132–42.
21.
Nienow AW, Miles D. The effect of impeller/tank configurations on fluid-particle mass transfer. Chem Eng J. 1978;15(1):13–24.
22.
Papastefanos N, Stamatoudis M. Effect of impeller and tank size on impeller power number in closed tanks for Reynolds numbers between 40 and 65000. Chem Eng Commun. 1989;80(1):69–79.
23.
Youcefi S, Youcefi A. Power consumption and mixing time in rheologically complex fluids by a two-bladed impeller. J Mech Sci Technol. 2015;29(2):543–8.
24.
Patel D, Ein-Mozaffari F, Mehrvar M. Improving the dynamic performance of continuous-flow mixing of pseudoplastic fluids possessing yield stress using Maxblend impeller. Chem Eng Res Des. 2012;90(4):514–23.
25.
Perarasu VT, Arivazhagan M, Sivashanmugam P. Heat transfer of TiO2/water nanofluid in a coiled agitated tank with propeller. J Hydrodyn. 2012;24(6):942–50.
26.
Rahmani L, Mebarki B, Allaoua B, Draoui B. Laminar flow characterization in a stirred tank with a gate impeller in case of a non-Newtonian fluid. Energy Procedia. 2013;36:418–27.
27.
Sahu AK, Kumar P, Patwardhan AW. CFD modeling and mixing in stirred tanks. Chem Eng Sci. 1999;54(13–14):2285–93.
28.
Triveni B, Vishwanadham B, Madhavi T, Venkateshwar S. Mixing studies of non-Newtonian fluids in an anchor agitated tank. Chem Eng Res Des. 2010;88(7):809–18.
29.
Woziwodzki S, Broniarz‐Press L, Ochowiak M. Transitional Mixing of Shear‐Thinning Fluids in Tanks with Multiple Impellers. Chem Eng Technol. 2010;33(7):1099–106.
30.
Youcefi S, Bouzit M, Ameur H, Kamla Y, Youcefi A. Effect of some design parameters on the flow fields and power consumption in a tank stirred by a Rushton turbine. Chem Process Eng. 2013;34(2):293–307.
31.
Youcefi S, Bouzit M, Youcefi A, Mokhefi A. Effect of an Inclined Slots on the Power Consumption and Vortices Size in a Rushton Turbine Agitated Tank, Chin. J Mech Eng. 2023;36(1):147.
32.
Youcefi S, Mokhefi A, Bouzit M, Youcefi A. Energy-Efficient Design Optimization of Two-Bladed Agitators in Cylindrical Tanks. Int J Heat Technol. 2023;41(6).
The statements, opinions and data contained in the journal are solely those of the individual authors and contributors and not of the publisher and the editor(s). We stay neutral with regard to jurisdictional claims in published maps and institutional affiliations.
